Shelly Flood
Flood sensor with temperature control
What is Shelly Flood?
Flood sensor with temperature control
With Shelly Flood, you can monitor not only the temperature of your home but also receive an instant notification if there is water or liquid leakage is detected.
Features
- No HUB required.
- Long-lasting battery.
- You will receive a notification immediately if there is any liquid detected by Shelly Flood.
- Be aware of temperature fluctuations and keep your floor heating at the desired temperature.
- Free history on the cloud.
- It can be integrated to work with all other Shelly devices.
- Compatible with Android, iOS, Amazon Alexa, Google Assistant, and home automation servers using MQTT, CoAP, and REST API.
- Easily make your Arduino project live and usable in your automation project.
Specification
| POWER | |
| Battery life | 18 months |
| Battery type | CR123A – NOT included |
| Power supply AC | No |
| Power supply DC | No |
| SPECIAL FUNCTIONS | |
| Illumination measurement | No |
| Motion detection | No |
| Open/Close | No |
| Tilt angle detection | No |
| Vibration detection | No |
| Water detection | Yes |
| Temperature measurement range | – 40°C ~ 60°C (± 1°C) |
| Humidity measurement range | |
| FEATURES | |
| Operational temperature | -40 to + 40 °C |
| Device power consumption | < 1 W |
| Local and remote control | Yes |
| Sunrise/Sunset | Yes |
| Weekly Schedule | Yes |
| CONNECTIVITY | |
| Wireless/WiFi Protocol | 802.11 b/g/n |
| Radiofrequency | 2400 – 2500 MHz |
| Radio signal power | 1mW |
| Range | up to 50 m outdoors and up to 30 m indoors (depending on the building materials) |
| DIMENSIONS | |
| Size | 70mm x 19 mm |
Device pinout
Flash/Debug
Use cases
Floor heating control
Floor heating creates coziness and comfort during the cold seasons. Use yours only when you need it with Shelly Flood. This tiny device allows you to adjust the temperature of your floor heating system while maximizing energy efficiency.
